24T 21.59mm offset Chain Conversion Sprocket for Harley Davidson Sportster
Sportster & Big Twins Transmission sprocket 24 Tooth for Harley Davidson ch
21.59mm ( 0.85" ) Width 23T =12.7mm ( 0.5" ) offset Sprocket for Harley Davidson Sportster & Big Twins for chain conversion
Convert your Harley Davidson to chain drive, or to fit wider tires. Last priced @ £83.03 updated 3/17
As we can obtain these pretty much overnight.....just place your order and we shall get you supplied...pronto
This sprocket fits Sportsters 91- 03 & Buells 92-02 and so called Big Twins 94-06 ( except 2006 Dyna ) plus 86 - 93 with a 15mm spacer and our 54425 seal, along with a 54010 "0" ring. I have added metric measurements in the hope to make it easier.... so... showing as ( D ) in the chart at 0. 85 in = ( 21.59 mm ) OVERALL width, measured from mainshaft bearing contact face to outer sprocket face. We will also supply the other sprockets in the chart by request, if not already listed on our site. ( A ) = 42.16mm ( B ) = 35.56 mm ( C ) = 27.68 mm
Working out your requirements....measure with a straight edge onto your outer face of the rear sprocket, already fitted on your wheel ( with clearance for your chain to tire ) centered and squared in your frame. Measure the distance from the same edge in contact with the rear sprocket outer face, to the exposed transmission sprocket spacer.
We also have available the following transmision sprocket spacers
0.600" ( approx 15 mm ) & 0.750" ( approx 19 mm ) & 0.840" ( approx 21 mm ) width.
You may require some additional spacing work ( send us a working drawing of dimensions if required ) these we can supply for around £20 for the transmission and from £30 for the rear wheel.
Rear sprockets by Performance Machine Alloy 48 tooth.... to just plain black steel