Fenders - All Listings
livepages::jquery();?>All Listings > ALL Custom > Fenders
Products In This Category: |
10" Flat Fender Raw Steel RUSTY Harley Bobber Chopper Trike Cycle Haven.... - £101.44So called 10" Flat Steel Fender The width varies a bit...so say around about 9 15/16" to 10 1/16 on the inside and may vary from to end with a 1.7mm wall thickness.. THESE are Available to order. Last updated 11/184" Ribbed Front Fender...POSSIBLE....Rear fender use Wide Glide Bracket - £46.83Designed for 18", 19" or 21" Front Wheel use. But..... with some work would make a cool rear.5 3/4" Ribbed Rear Fender Raw Steel.. Retro Style ....handmade by West Eagle in Japan - £158.96This measures 5 1/2" inside with a 14 3/4" Radius made in 19 gauge steel... ( just under 1mm in thickness ) with rolled side edges and the top end tip. States for 16" or 18" Vintage Repro tires...ALSO AVAILABLE IN 7" BY SPECIAL ORDER.5" Flat Fender Raw Steel Bobber, Trike, Harley Davidson / Chopper / Custom - £37.50Flat..The width varies a bit...so say around 5 1/4" on the outside with 1.7mm wall can be used on the front & rear measures 43" round and 29 1/2" across width from end to end, and it has a 14 1/8" Approx Radius. May have RUST on them6" Flat Fender Raw Steel Harley Chopper / Custom / Bobber / Trike Cycle Haven - £53.72Measures 42" around and 29" Across from end to end... Approximately a 14.5" radius.. best make a cardboard template to offer up to the bike.. Not a full continues curve..the last part of one end tends to flatten out may have RUST on them.7.5" Flat Fender Raw Steel Bobber / Trike / Harley Davidson / Chopper Cycle Haven - £42.45Flat Fender 7 1/2" Wide 14-Gauge Steel ( 1.89mm ) Measures from end to end around 44" & 30" across. Approximately 14 & 3/8" radius... make a cardboard template to offer up to the bike Not a full continues curve....the last part of one tends flatten out7.5" West Coast Choppers Rear Fender Fits Harley Custom Cycle Haven - £168.12Jesse James Fender…. OneTonHo... est for 160mm tyre use with a 13 & 3/8" radius making a 39 1/2" tyre coverage & measures 26 1/2 straight across from end to end. Or..select one from the catalog link via... More Information8.5" Flat Fender Raw Steel Chopper Custom Harley Bobber Trike Cycle Haven - £44.00The actual width may vary along its length...its approximately 29.5" tip to tip with a 14 7/8" radius with flattens out at one end These are supplied in RAW STEEL..NO corrosion resistant finish at all They may have rust marks all just due to natural skin8.5" West Coast Choppers Rear Fender Fits Harley Bobber Chopper Custom Cycle Haven - £179.90Jesse James Fender…. OneTonHo... est for 180mm tyre use9" Flat Fender Raw Steel ... Harley Davidson / Chopper / Bobber / Trike : ADDED £10 due to no 8.5 or 7.5 12/20 - £57.239" Flat Steel Fender 1.7mm wall... approximately 43" around and 28 1/2" Across from end to end with a 14.5" radius... make a cardboard template to offer up to the bike Not a full continues curve....the last part of one end tends to flatten outAssorted fender chart for you to select what size and call Angela on 07442 496 186 for a non obligated quote - £0.00expand the chart by taping on imageChrome Front Fender Narrow Harley Custom Bobber Chopper - £56.18Fits FX, FXR Sportster and Dyna Glide Models with Narrow 35mm or 39mm Front Forks use with 18", 19" and 21" Rims Having an install width of approximately 121 mm and a fender width of 104mm & 66mm Hole mounting centersFront Fender Raw Steel with Chrome Narrow Bracket for 19" Wheel Harley Custom Bobber Chopper Cycle Haven - £50.49Raw Steel Front Fender with Chrome Bracket Fits FX, FXR, XL and Dyna Glide Models with Narrow 35mm or 39mm Front Forks use with 18",19" ONLY ( NOT 21" ) Rims Having an install width of approximately 121mm fender width of 104mm & 66mm Hole mounting centersFront Fender Raw Steel with Chrome Wide Glide Bracket Harley Custom Bobber Chop Cycle Haven - £50.49Raw Steel Front Fender with Chrome Wide Glide Bracket Fits FXST, FXSTC and 4 Speed FXWG Models from 1980-2007 and Dyna Wide Glide Models from 1980-2005 use with 18", 19" and 21" Rims Fender 4" Wide, Bracket 6 3/4" Wide, Hole Center 2 3/4"Narrow Front Fender Raw Steel Harley Custom, Bobber, Chopper Cycle Haven - £39.07Fits FX, FXR Sportster and Dyna Glide Models with Narrow 35mm or 39mm Front Forks use with 18", 19" and 21" Rims Having an install width of approximately 121 mm and a fender width of 104mm & 66mm Hole mounting centersRibbed Front Fender Wide Glide Fits Harley Custom Chopper Bobber.. Cycle Haven - £50.84Fits 18", 19" or 21" Front Wheel. measures 28 3/4" front to backRibbed Narrow Front Fender Fits Harley Bobber Chopper Cafe Racer - £49.23Fits FX, FXR Sportster and Dyna Glide Models with Narrow 35mm or 39mm Front Forks use with 18", 19" and 21" RimsSpringer Front Fender Raw Steel for DNA Harley Custom Bobber Chopper - £49.13Fits our DNA Springer listing for 18", 19" and 21" wheelsWide Glide Front Fender Harley, Custom, Bobber Chopper - £44.55Raw Steel Front Fender Wide Glide Fits FXST, FXSTC and 4 Speed FXWG Models from 1980-2007 and Dyna Wide Glide Models from 1980-2005 use with 18", 19" and 21" Rims Fender |