Call Angela on 07442 496 186 or contact us via [email protected] for your required length & finish

Unfortunately.... after  BREXIT exchange rate... your looking at around £600 ..... recommended retail being £660 to £680 ( last updated 12.5.17 )

 A STD set measures 22" from bottom of headstock to spindle centre ( as a quick ref )

Calculating your fork length required... i would suggest adding an inch or 2, so as to be on the longer  rather than shorter side when working this out. So as to raise the bottom of the frame from level / parallel to the ground, even if you have allowed for the laden weight of a fully built bike with persons on board, to allow for braking / cornering forces that compress the suspension, to clear exhaust system and forward controls if close to the ground. Mock it all up and run a tape measure parallel to ya fork tubes to double check measurements.... you need to hold this for telescopic fork tubes a further 2" further out. Or say 4" forward of the centre of your headstock with a broomstiick / straight edge inserted.

 Either.... SATIN BLACK  with Chrome plated top clamp,  springs & rockers, or just all Chrome. Comes with complete 3/4" axle kit ( as photo ) with chrome dome nuts, including pivot sleeve for caliper mounting bracket & Harley speedo adapter