As used in our framework for many years

 For extra tubing required....combine any length  listed separately with this one shipping cost

Photo shows some of our original BARE BONES FRAME from back in the eighties

( supplied to many shops back then, enabling the building of their customers bikes )

( Frame Kits for 2 & 4 cylinders & V-Twins are also available )

 (( + Single Top Tube & hardtail Jap swingarm frame conversions  ))

These are our most common tube lengths we sell, ideal for the Upper & Lower for the hardtails kits. Or for making your own handle bars or other frame modifications. This ERW ( Electric Resistant Welded ) steel tubing.... similar to your everyday mass produced Honda - Yamaha - Suzuki old framework, only ours is probably double the wall thickness at 3.25mm. 

I have listed a photo showing completed frame for reference only

THIS SALE IS NOT FOR A WELDED FRAME

PLEASE NOTE....it is your responsibility to select the correct parts or material for your intended use, to work along with your design, such as for framework, a Cold Drawn Seamless ( CDS ) in a 4.06mm wall thickness, would be a stronger option for the Top Spine to the Steering Headstock connection ( together with other suitable bracing tubes/gussets ) than a BUDGET..... Electric Resistance Welded ( ERW ) 3.2mm wall tube ( for when braking forces are applied ) or for any other highly stressed areas, so if in any doubt.... always ask for advice.